fresh (adj) CLEAN, NEW FLUSH WITH CLEAN WATER. Flush with fresh water.
FILL WITH NEW DESICCANT. Recharge with fresh desiccant.
FROM (pre) Function word that shows "a point of departure" for movement, time, distance, "action", or separation REMOVE THE PROTECTIVE COVER FROM THE NEW ASSEMBLY.
FRONT (adj) Nearer to the person that looks or a "reference" point
NOTE : Refer also to IN FRONT OF. A "FAULT" LIGHT IS ON THE FRONT FACE OF THE COMPUTER.
FRONT (n) The front part or the front surface CLEAN THE FRONT OF THE XXXX WITH MATERIAL NO. 004.
fuel (v) REFUEL REFUEL THE AIRCRAFT. Fuel aircraft.
FULL (adj)
(FULLER, FULLEST) At or related to maximum travel, length, quantity, or detail MAKE SURE THE RESERVOIR IS FULL.
FULLY (adv) At or related to maximum travel, length, quantity, or detail TURN THE CONTROL TO THE FULLY CLOSED POSITION.
FUME (n) Gas or smoke, released from a material and that you can usually smell DO NOT BREATHE THE BCF FUMES.
FUNCTION (n) The operations that something must do THE PRIMARY FUNCTION OF THIS UNIT IS TO CONTROL THE FUEL FLOW.
function (v) OPERATE, MOVE THE ELEVATOR CONTROLS MUST OPERATE SMOOTHLY. The elevator controls must function smoothly.
THE CONTROL SYSTEM MUST MOVE FREELY. The control system must function freely.
furnish (v) GIVE, SUPPLY GIVE PERSON "B" A FLASHLIGHT. Furnish Man B with a flashlight.
A JACK IS SUPPLIED WITH THE TOOL ASSEMBLY. A jack is furnished with the tool assembly.
further (adj) MORE IF NECESSARY, ADD MORE GASKETS. If required, add further gaskets.
further (adv) MORE IF IS NECESSARY TO DECREASE THE CABLE TENSION MORE, USE THE TURNBUCKLE. Cable tension can be further reduced if necessary by means of the turnbuckle.
gain (n) INCREASE (v) THE RESULT IS THAT THE TEMPERATURE INCREASES. The result is a gain in temperature.
gain (v) GET GET ACCESS TO THE CONNECTORS AT THE REAR OF THE INSTRUMENT. Gain access to connectors at back of the instrument.
gap (n) CLEARANCE, DISTANCE MEASURE THE CLEARANCE BETWEEN THE SLAT AND THE WING LEADING EDGE. Measure the gap between the slat and the wing leading edge.
MEASURE THE DISTANCE BETWEEN THE ROTARY ACTUATOR AND THE STOP BOLT. Measure the gap between the rotary actuator and the stop bolt.
GAS (n) A fluid that has no shape or volume and that can "expand" THE TEMPERATURE SENSING UNIT IS A CAPILLARY TUBE FILLED WITH GAS.
|
