WORK (n) That which you do when you use "physical" strength (TN), or "mental" power (TN) DO THE WORK IN A CLEAN AREA.
work (v) WORK (n), Manufacturing Process BE CAREFUL WHEN YOU DO WORK NEAR FUEL TANKS. Be careful when you work near fuel tanks.
ALWAYS GRIND THE CABLE IN A CIRCULAR DIRECTION. When grinding the cable, always work in a circular direction.
worse (adj) Refer to BAD
WORST (adj) Refer to BAD
would (v) CAN SOLVENTS THAT STAY ON THE PART CAUSE CORROSION. Solvents left on the part would corrode the part.
wrap (v) PUT, WIND PUT THE PART IN OIL PAPER. Wrap the part in oil paper.
WIND MASKING TAPE AROUND THE PART. Wrap masking tape around the part.
WRITE (v),
WRITES, WROTE, WRITTEN To record data as words, letters, or symbols WRITE THE TEST DATE ON THE CERTIFICATE.
wrong (adj) INCORRECT MAKE MARKS ON THE BELLCRANK AND SHAFT TO PREVENT INCORRECT INSTALLATION. Match mark the bellcrank and shaft to avoid wrong installation.
wrongly (adv) INCORRECTLY DAMAGE CAN OCCUR IF THE HOSES ARE INCORRECTLY INSTALLED. Damage may occur if hoses are wrongly installed.
yet (con) BUT, TIME (n) MAKE THE NUTS TIGHT, BUT SUFFICIENTLY LOOSE TO REMOVE BY HAND. The nuts should be tightened, yet loose enough to remove by hand.
DO NOT REMOVE THE FIXTURE COVER AT THIS TIME. Do not remove the fixture cover yet.
YOU (pn) The "user" YOU CAN CONTINUE THE TEST IF THE PRESSURE IS SUFFICIENT.
YOUR (adj) Related to the "user" IF YOU GET SOLVENT IN YOUR EYES, FLUSH IT OUT IMMEDIATELY.
zero (v) ZERO (TN) ADJUST THE METER TO ZERO. Zero the meter.
|
